MIL-DTL-5675C
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This
section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements of documents cited
in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government Documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
QQ-N-286
Nickel Copper Aluminum Alloy, Wrought (UNS N05500)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-889
Dissimilar Metals
MS20115
Shackle Wire Rope
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,
Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
ASTM INTERNATIOINAL (ASTM)
ASTM-A376
Standard Specification for Seamless Austenitic Steel Pipe for High-
Temperature Central-Station Service
ASTM-B117
Salt Spray (Fog) Apparatus, Operating
ASTM-G47
Aluminum Alloy Products, Determining Susceptibility To Stress Corrosion
Cracking Of 2xxx And 7xxx
ASTM B633
Zinc On Iron And Steel, Electrodeposited Coatings Of
(Copies of these documents are available from https://www.astm.org or ASTM International, P.O. Box
C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
ASME INTERNATIONAL (ASME)
ASME Y-14.5M
Dimensioning and Tolerancing
(Copies of these documents are available from https://www.asme.org or ASME International, Three Park
Avenue, New York, NY 10016-5990, Phone: 800-843-2763 (U.S/Canada)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business