MIL-DTL-23599B(AS)
ASTM INTERNATIONAL
ASTM E1444
Standard Practice for Magnetic Particle Testing
(DoD Adopted)
ASTM E1742/ E1742M
Standard Practice for Radiographic Examination
(DoD Adopted)
(Copies of these documents are available online from www.astm.org or from ASTM
International, 100 Barr Harbor Drive, Conshohocken, PA 19428-2959.)
SAE INTERNATIONAL
SAE-AMS 2175
Castings, Classification and Inspection of. (DoD adopted)
SAE-AMS 2374
Quality Assurance Sampling and Testing, Corrosion and
Heat-Resistant Steel and Alloy Forgings.
SAE-AMS 2700
Passivation of Corrosion Resistant Steels. (DoD adopted)
SAE-AMS 5355
Steel, Corrosion Resistant, Investment Castings, 16CR-
4.1NI 0.28Cb 3.2 Cu, Homogenization and Solution
Heat Treated or Homogenization, Solution and
Precipitation Heat Treated. (DoD adopted)
SAE-AMS 5643
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing,
and Rings 16CR-4.1NI - 0.30Cb 4.0 Cu, Solution
Heat Treated, Precipitation Hardenable. (DoD adopted)
(Copies of these documents are available from www.sae.org or SAE International, 400
Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 First article inspection. When specified (see 6.2), a sample shall be subjected to first
article inspection in accordance with 4.2.
3.2 Design. The rescue hooks covered by this specification shall be designed as stated
below:
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business