FF-T-276C
2 APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and handbooks form
a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents
are those cited in the solicitation or contract.
FEDERAL REGULATIONS
FAR
Federal Acquisition Regulations (FAR)
(Copies of these documents are available online at www.acquisition.gov/comp/far/index.html or from the U.S.
Government Printing Office, 732 North Capital Street, NW, Washington D.C. 20401.)
FEDERAL SPECIFICATIONS:
QQ-S-698
-
Steel, Sheet and Strip, Low-Carbon.
MILITARY STANDARDS:
MIL-STD-129
-
Marking for Shipment and Storage.
(Copies of these documents are available online at https://quicksearch.dla.mil or from the Standardization
Documents Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM-A153/A153 -
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM-B633
-
Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
(Copies of these documents are available online at https://www.astm.org or from the ASTM International, P.O.
Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
SAE INTERNATIONAL
- Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited)
(Copies of these documents are available on line at www.sae.org from SAE International, 400 Commonwealth
Drive, Warrendale, PA 15096-0001, and Tel: 877-606-7323 [inside USA and Canada] or 724-776-4970 [outside
USA], email at CustomerService@sae.org.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business