FF-C-450F
Military Standards
MIL-STD-130
Identification Marking of U.S. Military Property
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2 Other publications. The following documents form a part of this specification to the extent specified herein.
Unless a specific issue is identified, the issue in effect on date of invitation for bids or request for proposal shall apply.
ASME INTERNATIONAL
ASME-B18.2.2
Square and Hex Nuts
(Copies of these documents are available online at https://www.asme.org or from the ASME International, Three
Park Avenue, New York, NY 10016-5990.)
ASTM INTERNATIONAL
ASTM-A47/A47M
Ferritic Malleable Iron Castings
ASTM-A153/A153M
Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM-B633
Electrodeposited Coatings of Zinc on Iron and Steel
ASTM-B695
Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM-E1444
Standard Practice for Magnetic Particle Testing
(Copies of these documents are available online at https://www.astm.org or from the ASTM International, P.O. Box
C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 10012
Measurement management systems -- Requirements for measurement
processes and measuring equipment
(Copies of these documents are available from https://www.iso.ch or to International Organization for
Standardization American National Standards Institute, 11 West 42nd Street, 13th Floor, New York, NY 10036.)
NCSL INTERNATIONAL
NCSL-Z540.3
Requirements for the Calibration of Measuring and Test Equipment
(Copies of these documents are available from https://www.ncsli.org or to National Conference of Standards
Laboratories (NCSL), 2995 Wilderness Place, Suite 107, Boulder, CO 80301-5404.)
SAE INTERNATIONAL
SAE-AMS-QQ-P-416
Plating, Cadmium (Electrodeposited)
SAE-J429
Mechanical and Quality Requirements for Externally Threaded Fasteners
(Copies of these documents are available from SAE International, 400 Commonwealth Drive, Warrendale, PA
15096-0001, Tel: 877-606-7323 (inside USA and Canada) or 724-776-4970 of these documents (outside USA),
2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the
text of this document and the references cited herein (except for related specification sheets), the text of this
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business