A-A-52538 Hook, Log-Grab (127 By 203 Millimeters)This CID covers one type of 127 x 203 millimeters (mm) (5 by 8 inches (in)) steel log-grab hook, which is intended to facilitate towing and skidding logs.

Pages 1 - 2 - 3 - 4

A-A-52538

3. REGULATORY REQUIREMENTS.

3.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).

4. QUALITY ASSURANCE PROVISIONS.

4.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).

4.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producer's own drawings, specifications, workmanship standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance.

4.3 Market acceptability (MA). The contractor shall provide products which have a proven market record based on the number of items sold, length of time the product has been on the market, and reliability and performance of the products as required under the contract or solicitation (see 6.3).

5. PACKING

5.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as specified in the contract or order (see 6.3).

6. NOTES. (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)

6.1 Addresses for obtaining copies of referenced documents.

6.1.1 The code of Federal Regulations (CFR) may be obtained from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.\

6.2 Non-Government publications. Copies of ASTM A304 “Alloy Steel Bars to End Quench Hardenability Requirements” are available from the American Society for Testing and Materials (ASTM), 1916 Race Street, Philadelphia, PA 19103. Copies of OSHA are available from the Department of Labor, Assistant Secretary of Labor, Occupational Safety and Health Administration, Washington, DC 20201.