A-A-52538
Figure 1. Hook, log-grab.
2.2.1 Dimensions. The hook shall conform to the dimensions shown in table I (see 6.4).
TABLE I. Hook dimensions.
|
Dimension |
Millimeter (inches) |
Tolerance |
|
|
Plus |
Minus |
||
|
Overall length |
203 (8.00) |
7 (0.25) |
4 (0.13) |
|
Overall depth |
127 (5.00) |
7 (0.25) |
4 (0.13) |
|
Length of hook |
102 (4.00) |
7 (0.25) |
4 (0.13) |
|
Width of bit |
16 (0.63) |
7 (0.25) |
4 (0.13) |
|
Width of shank |
19 (0.75) |
7 (0.25) |
4 (0.13) |
|
Depth of shank |
35 (1.38) |
7 (0.25) |
4 (0.13) |
|
Eye diameter (min.) |
19 (0.75) |
--- |
--- |
(Note: Dimensions in parenthesis are in inches)
2.2.2 Safety. The hook shall conform to all applicable standards of the Department of Labor Occupational Safety and Health Administration (OSHA) (see 6.2).
2.3 Identification markings. Identification marking shall be permanent and legible and shall include, as a minimum, the manufacturer’s trademark, the contract number, and the National Stock Number (NSN) (see 6.3).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business