MS16843G
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.06 |
1.52 |
.313 |
7.95 |
.77 |
19.56 |
1.56 |
39.62 |
.063 |
1.60 |
.375 |
9.53 |
.81 |
20.57 |
1.62 |
41.15 |
.09 |
2.29 |
.38 |
9.65 |
.88 |
22.35 |
1.81 |
45.97 |
.12 |
3.05 |
.438 |
11.13 |
1.00 |
25.40 |
1.88 |
47.75 |
.125 |
3.18 |
.44 |
11.18 |
1.03 |
26.16 |
2.12 |
53.85 |
.188 |
4.78 |
.500 |
12.70 |
1.12 |
28.45 |
2.19 |
55.63 |
.19 |
4.83 |
.62 |
15.75 |
1.22 |
30.99 |
2.25 |
57.15 |
.22 |
5.59 |
.625 |
15.88 |
1.25 |
31.75 |
2.38 |
60.45 |
.25 |
6.35 |
.69 |
17.53 |
1.38 |
35.05 |
2.62 |
66.55 |
.31 |
7.87 |
.750 |
19.05 |
1.41 |
35.81 |
3.00 |
76.20 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. All dimensions are "reference" dimensions.
4. Marking: The half-clamp.
FIGURE 1. Clamp, steel threaded (double grip) wire rope - Continued.
REQUIREMENTS:
Clamps shall be in accordance with figure 1.
Material carbon steel, 1035 (UNS G10350) to 1040 (UNS G10400), shall be in accordance with SAE J403. Protective coating:
Finish Code |
Finish |
A |
Protective coating shall be, mechanically deposited zinc coating in accordance with ASTM-8695, class 50, type II, or zinc coated (hot dip galvanized) in accordance with ASTM-A153/A153M or zinc coating (electrodeposited) in accordance with ASTM-8633, Fe/Zn 5, type VI. |
C |
Cadmium plated, in accordance with SAE AMS-QQ-P-416, type II, class 3. |
Z1 |
Zinc coating, hot-dip, in accordance with ASTM-A153/A153M |
Z2 |
Zinc coating (electrodeposited) in accordance with ASTM-8633, Fe/Zn 5, type VI. (protects to 120hr in salt spray in accordance with ASTM-8117 and environmentally friendly) |
Z3 |
Zinc coating, mechanically deposited, in accordance with ASTM-8695, class 50, type II (Chromate) |
Z4 |
Zinc coating, mechanically deposited, in accordance with ASTM-8695, class 50, type I (Plain zinc; lowest cost protection, but may be environmentally friendly) |
Environmental safety note:
If at all possible and for a safer environment, do not use cadmium or hexavalent chromate conversion. Recommend to use ASTM-8633, Fe/Zn 5, type VI.
For design feature purposes, this specification takes precedence over acquisition documents referenced herein.
In the event of a conflict between the text of this specification sheet and the references cited herein, the text of this specification sheet shall take precedence.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business