RR-S-550E
TABLE I. Wire rope open sockets, type A (all dimensions in inches) - Continued. 1/ 2/ 3/
1/ All dimensions (except D and G) under 4 inches to have a tolerance plus and minus 1/8-inch. All dimensions (except D and G) 4 inches and over to have a tolerance plus and minus 1/4-inch. Dimension D shall have a tolerance plus 0 minus 1/32-inch in uncoated sockets and plus and minus 1/32-inch in zinc-coated sockets. Dimension E, socket sizes 1-3/4 inches and larger, shall have a tolerance of plus and minus 1/4-inch. Dimension G is minimum.
2/ All dimensions are to be measured at the high point of all drafts, except at the basket where both lineal and diameter dimensions are to the outside edge of the basket.
3/ The pin hole (eye) diameter in sockets supplied with pins shall be in accordance with table II.
3.3.1.1 Pins. Type A sockets shall be supplied with pins. The diameters of the pin hole (eye) shall be as given in table II.
TABLE II. Diameters of pin hole (eye).
Socket size Inches |
Pin hole (eye) diameter: maximum over the diameter of the pin Inch |
1/4 - 5/8 3/4 - 1-3/8 1-1/2 - 2-1/8 2-1/4 - 2-3/8 |
1/16 3/32 1/8 1/4 |
3.3.1.2 Grooves. The basket in these sockets shall have one or more circumferential grooves of the inside surface, as shown on figure 1. The number and depth of the grooves shall be as specified in table III.
TABLE III. Number and the size of the grooves in wire rope sockets.
Socket size Inches |
Grooves |
|
Number |
Depth (approximately) inch |
|
1/4 to 3/4, inclusive 7/8 to 1-1/2, inclusive 1-5/8 and over |
1 2 3 |
1/16 1/8 3/16 |
3.3.2 Wire rope closed sockets, type B. These sockets shall be of the shape shown on figure 2 and of dimensions given in table IV, as specified.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business