MS51844E
Part or Identifying Number (PIN) example:
MS 51844 -62
Dash number on figure 1
Basic specification number
MS prefix
TABLE I. Nominal breaking strength
|
Cable size nominal |
Construction |
Nominal breaking strength (lbs) 1/ |
|||
MIL-DTL-83420, type I |
RR-W-410, type I, class 2 2/ |
||||
Zinc or tin coated carbon steel comp A |
Corrosion resistant steel comp B |
Zinc coated steel |
Corrosion resistant steel |
||
1/32 3/64 1/16 1/16 3/32 3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 |
3 X 7 7 X 7 7 X 7 7 X 19 7 X 7 7 X 19 7 X 19 7 X 19 7 X 19 7 X 19 7 X 19 7 X 19 7 X 19 6 X 19 IWRC 6 X 19 IWRC 6 X 19 IWRC 6 X 19 IWRC 6 X 19 IWRC |
110 270 480 480 920 1000 2000 2800 4200 5600 7000 9800 14400 |
110 270 480 480 920 920 1760 2400 3700 5000 6400 9000 12000 |
18360 24000 30200 37000 53000 |
16300 22800 28500 35000 49600 |
1/ Nominal breaking strength. Eye splices, when properly assembled using the manufacturer's
recommended tools and splicing instructions and when pulled with increasing tension, shall hold until wire rope breaks. It is preferred that tensile loads at failure be not less than 90 percent of the breaking strength specified in table I.
2/ In all applications where RR-W-410 type I, class 2 wire rope is being used, proof tests should be conducted to determine if one or two sleeves are required.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business