INCH-POUND
A-A-50469B
June 3, 1994
SUPERSEDING
A-A-50469A
September 8, 1989
COMMERCIAL ITEM DESCRIPTION
HOOK, REGULAR EYE, LATCH TYPE
The General Services Administration has authorized the use of this commercial item description in preference co style B, type 1, class I of the Military Specification MIL-H-19253C.
Abstract. This CID applies to latch type hooks chat support a load in a direct-pull configuration, and such load is carried in the base (bowl-saddle)of the hook. The hook is intended for use in material handling operations.
Salient characteristics.
1. Requirements. Hoist hooks shall be as specified herein and shall be in accordance with the basic requirements shown in table I for the rated capacity and throat openings. Hooks of a rated capacity greater than specified in this table will be acceptable provided they meet all other requirements. The hook shall have a latch type closure device to bridge the throat opening of the hook. The hook shall be constructed with a fixed lifting eye in the same plane as the throat opening.
TABLE I. Basic requirements.
|
Rated capacity Short tons (2,000 pounds) |
Inside eye diameter (minimum) (inches) |
Throat opening w/latch (minimum) (inches) |
|
1.5 |
0.875 |
0.875 |
|
2.0 |
1.125 |
0.937 |
|
2.5 |
1.250 |
1.000 |
|
5.0 |
2.000 |
1.688 |
|
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding Officer (Code 156), Naval Construction Battalion Center, 1000 23rd Avenue, Port Hueneme, CA 93043-4301, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business