RR-S-550E
3.2.5 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR)."
3.3 Constructional and dimensional requirements. Wire rope sockets are sized by the diameter of wire rope on which the sockets will be used, see following tables.
3.3.1 Wire rope open sockets, type A. These sockets shall be of the shape shown on figure 1, and dimensions given in table I, as specified.
TABLE I. Wire rope open sockets, type A (all dimensions in inches). 1/ 2/ 3/
Size (rope diameter) |
Basket |
Jaws |
|||||||||
Length |
Diameters |
Sides |
Eyes |
||||||||
Top |
Bottom |
Width |
Thick- ness |
Out- side diam- eter |
Thick- ness |
Width between eyes |
C/L eye to |
||||
OD |
ID |
Basket top |
Jaw top |
||||||||
J |
H |
G |
F |
K |
E |
M |
N |
C |
L |
B |
|
1/4 5/16 - 3/8 7/16 - 1/2 9/16 - 5/8 3/4 7/8 1 1-1/8 1-1/4 - 1-3/8 1-1/2 1-5/8 1-3/4 - 1-7/8 2- 2-1/8 2-1/4 - 2-3/8 2-1/2 - 2-5/8 |
2-1/4 2-1/4 2-1/2 3 3-1/2 4 4-1/2 5 5-1/2 6 6-1/2 7-1/2 8-1/2 9 9-3/4 |
1- 9/16 1- 11/16 1-7/8 2-1/4 2-5/8 3-1/4 3-3/4 4-1/8 4-3/4 5-1/4 5-1/2 6-3/8 7-3/8 8-1/4 9-1/4 |
11/16 13/16 15/16 1-1/8 1-1/4 1-1/2 1-3/4 2 2-1/4 2-3/4 3 3-1/8 3-3/4 4 4-1/2 |
3/8 1/2 9/16 11/16 13/16 15/16 1-1/8 1-1/4 1-1/2 1-5/8 1-3/4 2 2-1/4 2-1/2 2-7/8 |
3/4 13/16 1 1-1/4 1-1/2 1-3/4 2 2-3/8 2-3/4 3 3-1/4 3-7/8 4-1/4 4-3/8 4-5/8 |
1/4 5/16 3/8 7/16 1/2 5/8 11/16 13/16 15/16 1 1-1/8 1-5/16 1-7/16 1-5/8 1-7/8 |
1- 5/16 1-1/2 1-7/8 2-1/4 2-5/8 3-1/8 3-3/4 4-1/8 4-3/4 5-3/8 5-3/4 6-1/2 7 7-3/4 8-1/2 |
5/16 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-3/16 1-5/16 1-9/16 1- 13/16 2-1/8 2-3/8 |
11/16 13/16 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 3 3 3-1/2 4 4-1/2 5 |
1-9/16 1-3/4 2 2-1/2 3 3-1/2 4 4-1/2 5 6 6-1/2 7 9 10 10-3/4 |
3/4 7/8 1-1/16 1-1/4 1-7/16 1-3/4 2-1/16 2-5/16 2- 11/16 3-1/8 3-1/4 3-3/4 4 4-1/2 5 |
TABLE I. Wire rope open sockets, type A (all dimensions in inches) - Continued. 1/ 2/ 3/
Pin |
Cotter pin diameter |
Approximate weight, lbs. |
|
Diameter |
Length |
||
D |
O |
P |
|
11/16 13/16 1 1-3/16 1-3/8 1-5/8 2 2-1/4 2-1/2 2-3/4 3 3-1/2 3-3/4 4-1/4 4-3/4 |
1-3/4 2-1/16 2-7/16 2-7/8 3-1/4 3-7/8 4-1/2 5 5-5/8 6-3/8 6-5/8 7-5/8 8-3/4 10 11 |
3/16 3/16 3/16 1/4 1/4 5/16 3/8 3/8 7/16 1/2 1/2 1/2 1/2 1/2 1/2 |
1.1 1.3 2.3 3.8 6 10 15.5 22 32 46 55 85 125 165 252 |
See notes on next page.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business