A-A-50469 - Hook, Regular Eye, Latch Type
This CID applies to latch type hooks that support a load in a direct-pull configuration, and such load is carried in the base (bowl-saddle) of the hook. The hook is intended for use in material handling operations.
A-A-50472 - Hook, Swivel, Latch Type
This commercial item description covers a slit light consisting of a binocular microscope, a slit illumination system and accessories required to perform detailed examination of the tissue and media of the living human eye.
A-A-52538 - Hook, Log-Grab (127 By 203 Millimeters)
This CID covers one type of 127 x 203 millimeters (mm) (5 by 8 inches (in)) steel log-grab hook, which is intended to facilitate towing and skidding logs.
A-A-52539 - Hooks, Hoist (Regular Eye)
This CID covers a forged-steel, regular eye, hoist hook with safety latch. The hoist hook is intended for use in cargo handling, including the hoisting of conex metal shipping boxes.
A-A-52540 - Fittings, Wire Rope
This CID covers swaging-type sleeves and ferrules and a ferrule connector. The sleeves and ferrules are for wire rope. The fittings are intended for use in rigging of wire rope for the installation of the submarine pipelines and tanker mooring systems and for other applications where eyes or ferrules are required on the ends of wire rope. The sleeves and ferrules are intended to be cold-swaged onto wire rope with a swaging machine of 4448 kiloNewton (kN) force (500 ton (short (st) force) and equipped with the proper dies.
A-A-52555 - Hook, Hoist, Burton-Style
This CID covers a forged-steel, burton-style, hoist hook.
A-A-52587 - Hook, Rope, Deck
This CID covers requirements for one type of rope deck hook. The hook is intended for use in bolted tank service.
A-A-55603 - Clamp, Guy (Pole Line)
This commercial item description (CID) covers the general requirements for clamp, guy, (pole line). clamp, guy, (pole line) covered by this CID are intended for commercial/industrial applications.
A-A-55606 - Anchor, Guy, And Rods, Anchor
This commercial item description (CID) covers the general requirements for anchor, guy, and rods, anchor. Anchor, guy, and rods, anchor covered by this CID are intended for commercial/industrial applications.
AN100 - (
Images) Thimble - Wire Cable
AN111 - Bushing & Cable
AN116 - ( Images) Shackle, Anchor, Forger Carbon Steel Screw Pin
AN568 - Terminal & Fork End, Cable, For Swaging
AND10081 - ( Images) Terminal Shank-Swaging, Dimensions For (S/S By Sae-As10081)
FF-C-450 - ( Images) Clamps, Wire Rope
This specification covers clamps, wire, rope, bolted, and clamps, wire rope, threaded. These clamps are also commercially known as clips, wire rope.
FF-T-276 - ( Images) Thimbles, Rope
This specification covers mechanical thimbles, rope for mechanical ropes used in rigging, hoisting, towing, stowage, excavating, logging and stump removing equipment, and marine applications.
MIL-A-1896 - Axle, Cable-Reel, Submarine Mine
MIL-A-3777 - Anchor, Guy And Rods, Anchor (S/S By A-A-55606)
This specification covers anchors and anchor rods for use in pole line and tower construction.
MIL-A-3962 - Anchor, Ground, Arrowhead With Driving Equipment
This document covers arrowhead ground anchors with single cable assemblies and driving equipment.
MIL-C-17625 - Chain And Chain Fittings, Steel And Wrought Iron (For Harbor Defense Nets)
MIL-C-1862 - Clips, Rope, Steel
MIL-DTL-13220 - Hook, Sliding Choker (For Use With Wire Rope)
This specification covers cast steel or drop forged siding choker hooks for use with wire rope plain end loop and thimbled slings.
MIL-DTL-23599 - Hook, Rescue
This specification covers the requirements for all types of rescue hooks.
MIL-DTL-5675 - Shackle: Cable, Aircraft
This specification establishes the requirements for aircraft cable shackles to be furnished in the grades identified herein.
MIL-F-52553 - Fittings, Wire Rope (S/S By A-A-52540)
This specification covers swaging-type sleeves and ferrules and a ferrule connector. The sleeves and ferrules are for wire rope conforming to RR-W-410, type I, class 2, 6 x 19, or type I, class 3, 6 x 37 improved plow steel, wire strand, or independent wire rope core.
MIL-G-18413 - Guard, Anchor Chain (Rubbing Castings) (Use Mil-C-18295)
MIL-H-11611 - Hook, Safety, With Eye (Use Qq-S-637)
MIL-H-11665 - Hook, Choker: For Ferruled Wire Rope
This specification covers two sizes of choker hooks.
MIL-H-11884 - Hook, Steel, Cast, Quick Release, Tanker Anchorage Buoy
MIL-H-13152 - Hook, Barrel (Use Rr-C-271)
MIL-H-13367 - Hook, Case, Studded Plate
This specification covers a studded-plate case hook.
MIL-H-13568 - Hook, Hoist, Regular Eye (S/S By A-A-52539)
This specification covers a forged-steel, regular eye, hoist hook with safety latch.
MIL-H-13837 - Hook, Hoist, Burton Style (S/S By A-A-52555)
This specification covers a forged-steel, burton-style, hoist hook.
MIL-H-17913 - Hook, Bomb Shackle, Aero 3A
This specification establishes the requirements for the manufacture, inspection and testing of one type of bomb shackle hook for use on the bomb shackle, Aero 3A, and hereinafter referred to as hook.
MIL-H-19253 - Hooks, Hoist, Regular And Safety (S/S By A-A-50469 And A-A-50472)
MIL-H-20048 - Hook, Cargo (Drop Forged)
This specification covers commercially available hooks for general cargo hoisting.
MIL-H-3611 - Hook, Log Grab, 5 Inch By 8 Inch (S/S By A-A-52538)
This specification covers one type of steel log-grab hook.
MIL-H-52780 - Hook, Rope, Deck (S/S By A-A-52587)
This specification covers one type of rope deck hook.
MIL-H-6119 - Hooks, Arresting Gear, Proof Loading Of
MIL-P-13630 - Pelican Hook And Turnbuckle Assembly
This specification covers a turnbuckle assembly equipped with a pelican hook on one end and a grab link on the other end for use with 5/8- or 3/4-inch chain.
MIL-S-1151 - Socket, Wire Rope (Use Rr-S-550)
MIL-S-1885 - Shackle, 1-Inch, Model 1915, Anchor And Mine (Submarine Mine).
MIL-S-23471 - Swivel, Ball-Bearing Or Roller-Bearing (Special, Water-Tight)
This specification covers a special watertight ball-bearing swivel for minesweeping applications.
MIL-S-24214 - Shackles, Steel, General Purpose Regular And High Strength (S/S By Rr-C-271)
MIL-S-30506 - Shackle, Shackle Fitting, And Swivel, Buoy
This specification covers shackles, swivels, and shackle pins and split keys, used as chain fittings on Aids to Navigation buoys. Also included are specifications on the "Modeer" shackle, used in some locations for handling buoy chain in lieu of chain slings.
MIL-T-1547 - Thimbles, Rope (Solid)
This specification covers periscope outer tubes and tapers for Naval submarine periscopes.
MIL-T-1674 - Tip, Rope, Packboard
MIL-T-1805 - Thimble, Rope, Open, 21/4-Inch
MIL-T-23326 - Thimble, Synthetic Rope
This specification covers commercial thimbles used with synthetic rope.
MIL-T-5677 - Thimbles, Wire-Cable, Aircraft
MS16710 - Weight, Heaving Line
MS16711 - ( Images) Shackle, Offset Plate
MS16790 - Hooks, Guy, Heavy (Pole Line)
MS16791 - ( Images) Clamp, Guy (Pole Line) (S/S By A-A-55603)
MS16792 - Guy Attachment, Plate
MS16793 - Strand Connector (Pole Line)
MS16794 - Hooks, Guy, Heavy, Two Hole (Pole Line)
MS16795 - Sleeve, Serving
MS16796 - Guy Attachment (Two Holes)
MS16797 - Guy Attachment, (With Thimble)
MS16798 - Guy Attachment, Angle
MS16799 - Protector, Pole
MS16800 - Guy Attachment (Storm)
MS16801 - Guy Attachment (Oval Eye)
MS16802 - Guy Attachment, Strand Eye (Pole Line)
MS16803 - Guy Attachment (Oval Eye) Long
MS16804 - Clip, Wire Rope
MS16805 - Thimble, Rope
MS16842 - ( Images) Clamp, Wire Rope, Saddled, Single-Grip, Steel, Type I (Malleable-Iron And Steel Saddle)
MS16843 - ( Images) Clamp, Wire Rope (Double Grip), Threaded, Steel, Type Iv
MS18027 - ( Images) Hook, Helicopter Rescue
MS20115 - ( Images) Shackle - Wire Rope
MS27768 - ( Images) Terminal, Wire Rope, Splice
MS29523 - Hook, Filler Cap Chain (Asg) (S/S By Sae-As29523)
MS35796 - ( Images) Bolt, Thimble Eye (Straight), Hot Galvanized (Pole-Line)
MS35797 - ( Images) Bolt, Thimble Eye (Bent) Hot Galvanized (Pole-Line)
MS51826 - Hook, Hoist Or Sling, Direct Eye
MS51827 - Hook, Grab, Direct Eye
MS51844 - ( Images) Sleeve, Swaging-Wire Rope
MS51868 - ( Images) Clamp, Wire Rope, Double Saddled, Double-Grip, Steel, Type Iii
MS87006 - ( Images) Hook, Chain And S
MS87007 - ( Images) Swivel, Eye And Link (S/S By Rr-C-271)
NAS1042 - Steel, Shackle-Anchor, Forged Carbon, Round Pin (For Ground Support Equipment)
d, 4X2, 4X4, Gasoline Or Diesel Engine, 8,700 Pound To 27,500 Pound Gvwr
KKK-F-2752 - Fire Truck (Pumper), Structural, Commercial Cab And Chassis, 27,000 Pounds Cvw And Over, 1,000 Through 2,000 Gpm Pump, 500 Through 3,000 Gallon Tank
MIL-A-17204 - Adapters, Straight Or Reducing, Pipe Thread To Hose Thread (S/S By A-A-2622)
This specification covers either straight or reducing adapters, to connect hose-thread ends to pipe-thread ends.
MIL-A-24226 - Applicator For Day Chemical Power Portable Fire Extinguisher
MIL-A-81120 - Attachment, Kit, Runway Foaming-Nurse Truck, For Installation Of Tanker Trucks
MIL-B-3434 - Beater, Forest Fire
This specification covers a beater for manually extinguishing small fires.
MIL-B-52309 - Blanket, Fire: Wool, With Case (S/S By A-A-50230)
MIL-C-11053 - Coupling Assembly, Hose (Chemical, 3/4- And 1-Inch)
This specification covers two types and two sizes of high pressure hose coupling assemblies for connecting chemical or fire hose.
MIL-C-12315 - Connections, Hose, Fire And Water (Use Mil-C-52404)
MIL-C-22247 - Cartridge, Gas Pressure, For Pressurizing Dry Chemical Fire Extinguishers
MIL-C-24224 - Cartridge, Gas Pressure, For Pressurizing Dry Chemical Fire Extinguishers
This specification covers the requirements for gas pressure cartridges to be used in cartridge-operated dry chemical fire extinguishers.
MIL-C-24756 - Curtains And Blankets, Smoke, Portable
This specification covers the requirements and tests for portable smoke curtains and blankets, a generic term for which is used herein is "barriers". The barriers are intended as an aid in fighting shipboard fires.
MIL-C-24757 - Cloth, Fiberglass, Coated
This specification covers one type of inherently fire-safe, shrink-safe, woven cloths.
MIL-C-38364 - Conversion Unit, Runway Foaming And Fire Fighting Support
MIL-C-448 - Cart, Fire-Hose, Hand-Drawn
MIL-C-52155 - Charges, Fire Extinguisher, Antifreeze, Calcium-Lithium Chloride Base And Lithium Chloride Base
This specification covers fire extinguisher antifreeze charges having either a calcium-lithium base or a lithium chloride base.
MIL-D-25792 - Data, Engineering, For Aircraft And Missile Fire Protection, Requirements For
MIL-DTL-24416 - Extinguishing System, Fire, Fixed, Wet Chemical
This specification covers requirements for pre-engineered wet chemical fixed fire extinguishing systems for protection of deep fat fryers, and doughnut fryers onboard U.S. Navy ships and submarines. The systems covered under this specification are intended for use in new applications, and for backfit into existing wet chemical extinguishing system installations. The current wet chemical extinguishing system utilizes aqueous potassium carbonate (APC) extinguishing agent, in a concentration of 42.4 percent K2CO3 and 52.8 percent water.
MIL-DTL-52031 - Extinguisher, Fire, Vaporizing-Liquid Cf3Br; Hand-Held With Bracket
This specification covers a one-time usage, non-refillable, hand-held fire extinguisher (HHFE) containing CF3BR (ASTM D5632) and pressurized with nitrogen.
MIL-DTL-52404 - Connections: Hose, Fire And Water
This specification covers hose and pipe connections for use in firefighting and water supply systems.
MIL-DTL-62547 - Valve And Cylinder Assemblies, Halon 1301
This specification covers three classes of fixed fire extinguishers, referred to herein as "extinguishers", "valve and cylinder assemblies" and "assemblies", and an electrically and manually actuated discharge valve, referred to herein as "discharge valve" and "valve". These items are used with bromotrifluoromethane (Halon 1301) fire extinguishing systems in military vehicles (see 6.1 and
NAS1043 - Steel, Shackle-Chain, Forged Carbon, Screw Pin (For Ground Support Equipment)
NAS1044 - Steel, Shackle-Chain, Forged Carbon, Round Pin (For Ground Support Equipment)
NAS1045 - Thimble, Heavy, Wrought Steel, Wire Cable (For Ground Support Equipment)
NAS1046 - Rope, Clip-Wire, Forged Carbon Steel (For Ground Support Equipment)
NAS1049 - Link, Sling, Welded, Alloy Steel, Pear Shaped (For Ground Support Equipment)
NAS1050 - Hook, Grab, Forged Alloy Steel, Direct Eye (For Ground Support Equipment)
NAS1051 - Hook, Safety, Forged Carbon Steel, Snap, Direct Eye (For Ground Support Equipment)
NAS1052 - Hook, S, Alloy Steel (For Ground Support Equipment)
NAS1090 - Hook, Chain, S
NAS1170 - Fastener, Chain
RR-S-550 - ( Images) Sockets, Wire Rope
This specification covers mechanical sockets for mechanical wire ropes use in rigging, hoisting, towing, stowage excavating, logging and stump removing equipment, and marine applications.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business